Carry ammo training match finder

Pick your defensive load and we'll rank factory training ammo by how close it comes in recoil and point of impact. Numbers come from manufacturer product pages — every entry links to its source. Free, no login.

Closest training matches for Speer Gold Dot 115 gr JHP

98
#1 match
closeness /100
Winchester USA White Box 115 gr FMJUnadjusted
Power factor
137 vs 139
Bullet
115 gr
Velocity
1190 fps (Δ 20)
97
#2 match
closeness /100
Federal American Eagle 115 gr FMJUnadjusted
Power factor
136 vs 139
Bullet
115 gr
Velocity
1180 fps (Δ 30)
Source
Federal
94
#3 match
closeness /100
Hornady American Gunner 115 gr JHPUnadjusted
Power factor
133 vs 139
Bullet
115 gr
Velocity
1155 fps (Δ 55)
Source
Hornady
92
#4 match
closeness /100
Federal Syntech Training Match 124 gr SyntechUnadjusted
Power factor
140 vs 139
Bullet
124 gr (Δ 9)
Velocity
1130 fps (Δ 80)
Source
Federal
92
#5 match
closeness /100
CCI Blazer Brass 115 gr FMJUnadjusted
Power factor
132 vs 139
Bullet
115 gr
Velocity
1145 fps (Δ 65)
Source
CCI

Published velocities come from manufacturer test barrels and vary by gun and lot. The best check is to chronograph both loads from your own gun and confirm point of impact at 7 to 15 yards.

How this works

Recoil felt in the hand is driven mostly by power factor — bullet weight times muzzle velocity, divided by 1,000. Two loads with the same power factor push the gun back with roughly the same impulse, so the dot or sights return to the same place on the same cadence.

Point of impact is driven by bullet weight. A heavier bullet spends more time in the barrel, so the muzzle rises more before the bullet leaves — a 230-gr load prints higher at 15 yards than a 185-gr one from the same gun. Matching bullet weight matches POI.

We score each training load against your carry load as 0.5 × power-factor diff + 0.3 × weight diff + 0.2 × velocity diff, then penalize +P mismatches and give a small bonus to pairings the manufacturer explicitly ships together (Speer Gold Dot ↔ Lawman, Federal HST ↔ Syntech, etc.).

Barrel length adjustment

Published velocities come from the manufacturer's test barrel — usually 4" or 5". A shorter barrel runs slower. We adjust each load to your barrel using an approximate fps-per-inch factor by caliber (9mm 25, .45 ACP 15, .38 Special 30). Where Lucky Gunner Labs has measured a short-barrel velocity close to your barrel, we use the measured number and say so. If a maker doesn't publish a test barrel length, we use the unadjusted velocity and flag it.

Confirm with your own gun

Published velocities vary by gun and lot. The only honest check is to chronograph both loads from your own pistol and confirm point of impact at 7 to 15 yards. You can enter your chronographed numbers in the override panel below the results.

Ammunition manufacturer?

Add your lines to the dataset. We publish manufacturer-stated velocity, test barrel and source URL verbatim, and we don't edit your numbers.